Dealing with Water Damaged Drywall the Easy Way

Water Damage Restoration Professionals

Water Damaged Drywall

Drywall is a layer of gypsum sandwiched between two sheets of paper. It can be made with parts such as paper, fiberboard and plaster. While sheetrock is made of sand, water and plaster, sandwiched between two layers of thick paper-boards. It is frequently utilized in both non-commercial and commercial building and is known by various other names, such as sheetrock, wallboard and plasterboard, gypsum board among others. When the paper and core of the drywall become compromised, you are left with no other choice besides replacement.

Drywalls takes in water like a sponge causing the core to break down and the paper to separate from the core. It is possible to do some repair only in the very early stages of water damage. Making use of air-movers and a dehumidifier for quick drying of the drywall is also advised to achieve that goal. In circumstances where water damage is minor, it is possible to obtain away with drying out, taping, mudding and painting the wallboard. But remember that there is no point in fixing the drywall until you have repaired the water leak.

When to Replace a Water Damaged Drywall

Sometimes, after drying out, taping, mudding and painting the wallboard there are damages hidden. But by the time it is finally discovered, it might have mold and too far or too late to dry and repair it. In this case, replacement rather than repair work could be needed.

When drywall water damage is severe due to flooding it takes in the water quickly and swells up. A professional water damage providers must then replace the boards.  Moreover, a big concern with wet drywall is the growth of mold and mildew and the associated health issues these pathogens bring. Since drywall is generally constructed with a type of paper, it makes an ideal food for mold that can grow from 24 to 48 hours after water damage has occurred. It can grow in insulation and carpeting. So as a preventative measure against mold, sanitation is also needed to prevent further mold growth.

Water Damaged Drywall Replacement Tips

  • There are different structure codes that point out drywall requirements. Before starting a restoration job, it is recommended to check these policies.
  • Drywall sheets are available in various sizes, widths and categories, depending upon the project at hand. For example, green boards are made use of in kitchens and restrooms due to the fact that they are water resistant.
  • It is best to utilize a utility knife to remove the ruined drywall. It is an excellent idea to make use of even lines and to make certain the shape is geometric and simple to match, such as a square or rectangle.
  • Prior to drywall restoration, it is necessary to repair the source of water damage and dried-up the area extensively as well as clean it from any dust and dirt.
  • As soon as the affected area is eliminated, it is advised to investigate and see if there is any more damage or mold behind the affected area. If insulation is moist and has soaked up water, it will need to be replaced.
  • When changing the drywall, determining and cutting it to fit the hole is important. Then the new drywall has to be fitted in its area in the wall. It may be needed to utilize a plywood board to support the drywall and anchor it.
  • The next step is to secure the drywall with tape all around the edges.
  • A number of coats of mud, or plaster, need to be applied to the location; nevertheless, it is crucial to smooth out each application and wait up until it dries prior to applying the next one.
  • Sanding is then necessary to smooth any rough edges or flaws.
  • The final action is painting the restored place to match the color on the wall.

 

Handy people could choose to cut expenses and change damage drywalls themselves. However, changing water-damaged drywall is not an easy task and must not simply be done by an unskilled person and the only option left is to call a professional restoration companies for assistance.

Author: Ramsay Danny

Danny Ramsay is a licensed professional premier restoration technician for fire and water damage, mold remediation services.